Two Phase Liquid Plain Counter Evaporator

LiquidTwoPhasePlainCounterEvaporator

This experiment is for a liquid - two phase plate heat exchanger with plain plates and counter-current flow.

The plate heat exchanger uses the default parameters of the component. The start values parameters in the Initialization tab were modified to fit with the set boundary conditions for the liquid flow to heat the two phase flow causing evaporation. The visualizer under the heat exchanger reports the heat flow between the liquid and two phase flow. The visualizer above the heat exchanger shows the general temperature profile of the liquid and two phase flow through the header volumes in the heat exchanger. The left side of the visualizer corresponds with the left side of the heat exchanger where the two phase outlet and liquid inlet are. Therefore the right side of the visualizer corresponds with the two phase inlet and the liquid outlet.