Evaporator

This experiment uses the testbench AirTwoPhaseHomogeneous where the air flow heats the two-phase flow causing evaporation. The flat tube heat exchanger used was a TwoPhaseAirVertical, some of the specifications include:

Aluminum wall material
Air friction model: KimBullard
Air heat transfer model : LouveredFinChang
Liquid friction model: DensityProfileFriction
Liquid heat transfer model : SimpleTwoPhase
Geometry: EvaporatorExample

Note:

When change the input into different type (such as: Ramp, Step, etc.,), remember the initial value should be set manually.